| Customization: | Available |
|---|---|
| After-sales Service: | Parts Replacement |
| Type: | Forming Machine |
Suppliers with verified business licenses
| Suitable material | PPGI/Aluminium sheet/galvanized sheet/various sheet plates |
| Thickness of coil sheet | 0.3mm |
| Coil width | 1000mm |
| Material of main frame | 350H steel |
| Diameter of Soild shaft | 70mm, high grade 45# steel |
| Roller | Quenched and tempered treatment, |
| hard chrome coated 0.05-0.07mm | |
| Thickness of middle plate | 16mm |
| Forming station | 16stations |
| Drive type | By chain(1.0 inch) link bearing model 6210 |
| Power of main motor | 7.5kw with Cycloidal reducer |
| Power of pump station | 3kw |
| Forming speed | About 10-15m/min |
| Hydraulic cutting | Controlled by PLC |
| PLC | DELTA(TAIWAN)/Mitsubishi |
| Material of razor blades | Cr 12, quenching 58-62ºC |
| Frequency converter | It has the advantage of slowing down before cutting, to ensure the |
| length accuracy(±1mm, far better than industrial standard ±3mm). |
Hydraulic Cutting Details
1) Adopts post cutting, Stop to cut;
2) The cutting blade material is Cr12MOV with quenched treatment.
3) Adopts welded frame for good rigidity.
4) Cutting frame has been heat treatment to avoid final product deformation. cutting length tolerance ±2mm.
5) The power of cutting is provided by hydraulic station.
6) The final product can be cut as per set length in PLC controller, and the length is automatically measured by encoder. When final product reaches the set length, machine will stop to cut the product automatically. Finish this action, machine will run again continuously.
1. Warranty period: 1 year or 2000 working hours
2. Pay attention to the warranty scope
3. If the customer reports a quality problem, the following information must be provided:
1) Please verify the working time of the whole machine (nameplate photo, instrument photo)
2) Make a clear statement or cause analysis of the failure of the component (provide working environment, pictures, videos)
3) Give us feedback as soon as possible
Q1:1:What is your minimum order quantity?
----1unit, customized service is available
Q2:How Long for lead time ?
----If the parts are in stock, it is usually delivered within 10 working days. Other customized styles take about 20 working days. It depends on the customer's requirements for the forklift
Q3:How long is your warranty period?
---1 year or 2000 working hours
Q4: What payment terms do you accept?
---1) T/T 30% in advance as deposit,70% before loading
---2) T/T30% as deposit ,40% after inspection forklift ,30% before loading ----3) T/T20% as deposit ,50% after inspection forklift ,30% against BL copy
Q5:How about the shipping term ?
---1)LCL By Sea
---2)20GP/40HQ/45FT
---3)By Bulk Cargo
){kind=link}